...
The first set of results is here (captures are in 4 different formats, sorted by the VLAN):
Capture from H4
Capture from H3
Capture from H2
D-cart results for this setup are here H4-H2
The format is the following:
code timestamp seq_num delay
code := 1 (loss or unordered packets), 2 (#hop change - not used in gts), 4 (significant delay change), 8 (heartbeat - every 100 packets)
if the code is even then you have a H(istory) with the last packet received and its own info...
The sending calibration is: 1 dcart ping (smallest possible packets but "full" of extra info) each 100ms
In the second setup, netem tool was used on a link H3-H2 with the following parameters: delay 100ms 2ms distribution normal loss 10%
The set of results of the measurements with netem switched on on H3-H2 is here:
Capture from H4
Capture from H3
Capture from H2
D-cart results for this setup are here H4-H2 (w. netem)