You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 8 Next »

eduroam SP

Basic deployment considerations for wireless LANs

Administrative obligations of eduroam SPs

Set up of WiFi hotspots

All of the solutions presented below support the basic requirements for an eduroam SP: support for IEEE 802.1X authentications, WPA2/AES support. When deploying eduroam, deployers often want to make use of additional features such as multi-SSID support, dynamic VLAN assignment and others. Every section contains a table with a short overview of their support of such additional useful features.

Cisco (controller-based solutions)

This section begs for community input.

I can provide input for this section before the middle of April 2011 (Wenche Backman)

Cisco (stand-alone APs with IOS)

Feature

supported?

multi-SSID

yes

VLANs

yes

dynamic VLAN assignment

partial

Unable to render {include} The included page could not be found.

Aruba

This section begs for community input.

Meru

This section begs for community input.

Lancom

Feature

supported?

multi-SSID

yes

VLANs

yes

dynamic VLAN assignment

yes

Unable to render {include} The included page could not be found.

Apple AirPort Express

Feature

supported?

multi-SSID

no

VLANs

no

dynamic VLAN assignment

no

Set up of switches for wired eduroam

Unable to render {include} The included page could not be found.

Set up of networking equipment in the network core

Set up of eduroam SP RADIUS servers

  • No labels